UVDTF
Step 1
Thoroughly clean the surfaces to which you will be applying your UVDTF for a flawless transfer
Step 2
Using a squeegee and a small amount of pressure, rub over both sides of your UVDTF to ensure that the design has properly transferred to the B film.
Step 3
Slowly begin to peel the B film away from the backing paper whilst taking care to make sure that the design has transferred to the B film fully.
Step 4
Carefully place the design onto the prepped surface ensuring that it is positioned correctly as you will not be able to remove once adhered
Step 5
Rub over the surface of your UVDTF with a squeegee or sponge to ensure that the design has transferred to the prepped surface sufficiently. Work from the centre outwards to remove any unwanted air bubbles.
Step 6
Slowly peel back the B film to reveal the final design
Note: We recommend hand washing only